I-Infrared Thermal Camera Manual

Ngokubanzi

Ikhamera ye-infrared ekhanyayo ye-infrared ye-TGR009 ngumbono we-infrared ofanelekileyo kwizixhobo ezincinci ezine-Picatinny guide rails, kwaye inokutshintshwa ngomzila we-adapter.

Inokusebenza ngesiqhelo kubumnyama obupheleleyo, umsi, inkungu, imvula kunye nokunye okusingqongileyo okurhabaxa.

Inokutshintshwa nge-CR123A (3V) engahlawulekiyo okanye ibhetri ye-lithium ehlaziywayo 18500 (3.7V).

-

Qhagamshelana nathi

iinkcukacha zemveliso

Inkcazo yokusebenza

Ikhamera ye-infrared ye-infrared ye-TGR009 iquka iindawo ezimbini eziphambili: ikhamera ye-thermal kunye ne-fixture. Iboniswe njengoMzobo, umzobo uzinzile kwisixhobo.

I-TGR009 sisixhobo somfanekiso oshushu esixhotyiswe ngereticle ejoliswe kuyo. Iyawuva umahluko weqondo lobushushu bezinto ezikumbono, kwaye iguqula umahluko wobushushu obufunyenweyo ube ngumfanekiso omnyama-namhlophe obonakalayo okanye umbala ongeyonyani. Umkhulu umahluko phakathi kwethagethi kunye nobushushu obungasemva, kokukhona kucaca ngakumbi kubasebenzisi bomfanekiso.

Amacandelo aphambili abandakanya i-lens yenjongo ye-Germanium, i-eyepiece ende, imodyuli yokucinga nge-thermal, i-OLED ukubonisa, ibhodi edibeneyo yesiphaluka (kubandakanywa isiphaluka senkqubo yokulawula amandla) kunye nepaneli yokulawula engundoqo. Ireticle iboniswa njengemifanekiso ye-elektroniki.

Ukuhlangabezana neemfuno ezahlukeneyo zabasebenzisi ngabanye, i-TGR009 ibonelela ngeendlela ezahlukeneyo zolawulo lwedijithali, ezifana:

• Ukukhetha imo yemiboniso emininzi

• Usondezo lwedijithali

• Ukukhetha umbala weReticle

• Ukukhetha uhlobo lwesahlulelo
• Ulungiso lwangaphakathi/ lwangaphandle

• Uhlengahlengiso lweDiopter

• Lungiselela imimiselo

Inkcazo yokuSebenza

IParameter iyonke
Ukwandiswa kwaMacho	3×
Len Material	eJamani
Isakhelo Ukuphindaphinda	50hz
Isisombululo somtshini	640×512
I-Pixel Pitch	12μm
Bonisa	I-AMOLED SVGA 050
Isigqibo sokuBonisa	800×600
Ixesha lokumisela	3s
Ukwandiswa kweDijithali	2 ×, 4 ×
Umfanekiso wePolarity	Ukushisa okumnyama / ubushushu obumhlophe / umnyama / intsimbi ebomvu / isibhakabhaka, njl
Ipateni yeReticle	Ulwahlulo oluchanekileyo olusemgangathweni, ulwahlulo olulula lomnqamlezo, ulwahlulo lomgama oqikelelweyo, imbuyekezo yesiko ulwahlulo lwemitha.
Ipateni yeReticle	Ulwahlulo oluchanekileyo olusemgangathweni, ulwahlulo olulula lomnqamlezo, uqikelelo
Umbala weReticle	Mnyama/Mhlophe/Luhlaza/Bomvu
IParameter yokubona
Ubude bokuJonga	35mm
F#	F1.0
FOV(H°x V °)	18°×14°
Ukugxininisa	Imanyuwali
Uluhlu lokuJonga	1m~∞
Phuma kwiDayimitha yoMfundi	8mm
Phuma kuMgama woMfundi	40mm
Ixesha lokumisela	5s
Imodi yoLungiso lweDiopter	Imanyuwali
Uluhlu loLungiso lweDiopter	±5
Iparamitha yoMbane
Ibhetri	4×CR123A /4×16340
Ixesha lokuSebenza (25℃)	5.5 iiyure
Indlela yokufaka ibhetri	Iibhetri ezine kufuneka zifakwe kwicala elinye.
Ubonelelo lwaNgaphandle lwaMandla	5V DC/1000ma
IParameter yePhysical
Imo yoQhagamshelwano	I-Picatinny Rail MIL-STD-1913 kunye ne-Dovetail yesikhumba kaloliwe (Utshintsho olufakelweyo)
Ubungakanani (ngaphandle kwesigqubuthelo samehlo kunye nesixhobo)	7.05“(L)×2.25“(W）×2.21”(H)intshi
Ubungakanani (kubandakanywa isigqubuthelo seso kunye nesixhobo)	8.39“(L)×2.44“(W）×2.76“(H)intshi
Ukuphakama komzila wesikhumba ukuya umgca we-eyepiece	1.57" intshi
Ubunzima (ngaphandle kwebhetri, ikepusi yelensi, into ekhoyo)	1.10 pt
Ubunzima (ngaphandle kwebhetri, umzobo)	1.50 pt
Ipharamitha yendalo esingqongileyo
Ubushushu bokusebenza	-40℃~55℃
Ubushushu boGcino	-40℃~60℃
Isicelo Sokothuka	Dibana ne-MIL-STD-810G (GJB150A) esemgangathweni
Inqanaba lokugquma	IP66 Ingangenwa ngamanzi kwaye ingagqunywa luthuli